No products
SAE There are 15467 products.
-
SAE AMS 6501E:2017-11-21
SAE AMS 6501E:2017-11-21 Steel, Maraging, Welding Wire 18Ni - 8.0Co - 4.9Mo - 0.40Ti - 0.10Al Vacuum Induction Melted, Environment Controlled Packaging
$33.75 $75.00 -55%In Stock -
SAE AMS 4916L:2017-11-21
SAE AMS 4916L:2017-11-21 Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed
$33.75 $75.00 -55%In Stock -
SAE AMS 6302K:2017-11-21
SAE AMS 6302K:2017-11-21 Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)
$33.75 $75.00 -55%In Stock -
SAE AMS 2451/3C:2017-11-21
SAE AMS 2451/3C:2017-11-21 Plating, Brush, Nickel Low Stress, Low-Hardness Deposit
$33.75 $75.00 -55%In Stock -
SAE AMS 2431/1F:2017-11-21
SAE AMS 2431/1F:2017-11-21 Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC)
$33.75 $75.00 -55%In Stock -
SAE AMS 3331C:2017-11-20
SAE AMS 3331C:2017-11-20 Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75 Shore A Hardness For Products in Fuel Systems/Lubricating Oils
$33.75 $75.00 -55%In Stock -
SAE AMS 6951:2017-11-20
SAE AMS 6951:2017-11-20 Titanium Alloy, Sheet 5Al - 4V - 0.75Mo - 0.5Fe Annealed
$33.75 $75.00 -55%In Stock -
SAE J 587:2017-11-20
SAE J 587:2017-11-20 License Plate Illumination Devices (Rear Registration Plate Illumination Devices)
$33.75 $75.00 -55%In Stock -
SAE AMS-QQ-A-200/4C:2017-11-20
SAE AMS-QQ-A-200/4C:2017-11-20 Aluminum Alloy 5083, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Nov 2017)
$33.75 $75.00 -55%In Stock -
SAE AMS 3382D:2017-11-20
SAE AMS 3382D:2017-11-20 Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness
$33.75 $75.00 -55%In Stock -
SAE AIR 1419C:2017-11-20
SAE AIR 1419C:2017-11-20 Inlet Total-Pressure-Distortion Considerations for Gas-Turbine Engines
$33.75 $75.00 -55%In Stock -
SAE AMS 2451/11B:2017-11-20
SAE AMS 2451/11B:2017-11-20 Plating, Brush, Cobalt
$33.75 $75.00 -55%In Stock
